Hello, welcome to the official website of Yancheng Tongda Valve Co., Ltd.!
Online message |Sitemap |ChineseOne-piece ball valve structure and application range
Author:通达 Popularity: Issuing time:2018-07-19 17:48
The advantages of a one-piece ball valve: simple structure, small size and light weight. The fluid resistance is small, and its resistance coefficient is equal to the pipe length of the same length. The operation is convenient, the opening and closing is rapid, and the rotation is 90° from full opening to full closing, which is convenient for long-distance control. The maintenance is convenient, the ball valve has a simple structure, and the sealing ring is generally movable, and the disassembly and replacement are relatively convenient.
Wide range of applications, from small to a few millimeters, up to a few meters, from high vacuum to high pressure can be applied. It is compact and reliable. At present, the sealing surface material of the ball valve is widely used in plastic and has good sealing performance. It has also been widely used in vacuum systems. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium does not cause erosion of the sealing surface of the valve.
The working principle of the wide-type ball valve is to make the valve unblocked or blocked by rotating the valve. The ball valve switch is light in weight, small in size, can be made into a large diameter, reliable in sealing, simple in structure, convenient in maintenance, and the sealing surface and the spherical surface are often closed, and is not easily eroded by the medium, and is widely used in various industries.
One-piece ball valves can be divided into straight-through, three-piece ball valves and right-angled ones according to their channel positions. The latter two ball valves are used to distribute the medium and change the direction of the medium. The installation and maintenance of the wide ball valve should pay attention to the following matters: the position where the valve handle rotates should be left. Cannot be used for throttling. Ball valves with drive mechanisms should be installed upright.
A one-piece ball valve is primarily used in the pipeline to cut, distribute, and change the direction of flow of the media. Ball valve is a new type of valve widely used in recent years. It has the following advantages: the fluid resistance is small, and its resistance coefficient is equal to that of the same length. The structure is simple, small in size and light in weight. It is compact and reliable. At present, the sealing surface material of the ball valve is widely used in plastic and has good sealing performance. It has also been widely used in vacuum systems. The operation is convenient, the opening and closing is rapid, and the rotation is 90° from full opening to full closing, which is convenient for long-distance control. The maintenance is convenient, the ball valve has a simple structure, and the sealing ring is generally movable, and the disassembly and replacement are relatively convenient. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium does not cause erosion of the sealing surface of the valve.
One-piece ball valve is a relatively new type of ball valve. It has some unique features unique to its structure. For example, the switch has no friction, the seal is not easy to wear, and the opening and closing torque is small. This reduces the size of the actuators that are supplied. Wide range of applications, from small to a few millimeters, up to a few meters, from high vacuum to high pressure can be applied. When the ball is rotated 90 degrees, all the spheres should appear at the entrance and exit, thus cutting off the flow.
Source of this article: http://en.tongdavalve.com/news/146.html
Recommended information
- What are the specific categories in the valve mater2018-07-19
- How to control the insulation performance and seali2018-07-19
- Do you know the correct installation method of forg2018-07-19
- Learn how the manual valve is opened correctly2018-07-19
- How much pressure can the high pressure ball valve 2018-07-19
- Talking about the installation and maintenance know2018-07-19
- One-piece ball valve structure and application rang2018-07-19
- High pressure casting cut-off valve has four advant2018-07-19
- Why high pressure ball valves are widely used by ev2018-07-19